In Spain, the vehicle fleet increasingly presents a higher average ageso it is very It is important to carry out good maintenance of essential parts (tyres, brakes, timing belt, etc.) so that the vehicle continues to circulate safely on the road network of our country.
For this reason, it is necessary to point out that the residues from the combustion process accumulate over the years both in the engine and in the exhaust pipe, which is why they completely affect the performance of the vehicle. This is the case of carbon, which normally remains in the exhaust pipeand whose cleaning is essential.
What advice does this mechanic give?
The mechanic specifies that this carbon generates smoke problems, loss of power or jerks. Therefore, it recommends carrying out decarbonization every two maintenance with a specific machine for this task.
The video explains the operation of this tool that performs the task automatically in 40 minutes thanks to a water electrolysis process. Finally, the mechanic indicates that after decarbonization, a three-minute road test is necessary, in which you must drive at more than 3,000 revolutions; the entire test will be reviewed by the decarbonizing machine telematically.
What is the price of removing carbon in a workshop?
One option is to take your vehicle to a specialized workshop, where the engine will be decarbonized using oxygen gas and a machine designed for this purpose, as in the video. This process cleans the combustion chamber and the other parts involved in the operation of the engine.
The cost of this service may vary depending on the workshop and the type of engine, since the prices are different for gasoline or diesel engines. However, Generally the price ranges between 50 and 100 euros.
How to clean the engine without causing damage?
First, you need to let the engine cool down for at least an hour. Afterwards, it is due toapply a degreaser, ideal for removing the most difficult dirt. After letting the degreaser take effect, each piece should be cleaned with a soft-bristled brush.
Next, a hose with water is used to rinse away any remaining dirtmaking sure the pressure is very low to avoid damaging the engine’s electrical components. Finally, the engine is dried with an air compressor and a dry cloth, and turned on to verify that everything is working well.